AEG BSE792220M Manuel d'utilisateur télécharger pdf (Page 26)

3. Insert the tip of the food sensor

exactly in the centre of the casserole.

The food sensor should be stabilized

in one place during baking. Use a

solid ingredient to achieve that. Use

the rim of the baking dish to support

the silicone handle of the food

sensor. The tip of the food sensor

should not touch the bottom of a

baking dish.

4. Cover the food sensor with the

remaining ingredients.

5. Put the plug of the food sensor into

the socket located in the front frame

of the appliance.

The display shows the food sensor

symbol.

6. Press

or in less than 5

seconds to set the food core

temperature.

7. Set a heating function and, if

necessary, the oven temperature.

8. To change the food core

temperature, press .

When the dish is at the set temperature,

an acoustic signal sounds. The appliance

deactivates automatically.

9. Touch any symbol to stop the signal.

10. Remove the food sensor plug from

the socket and remove the dish from

the appliance.

WARNING!

There is a risk of burns as the

food sensor becomes hot.

Be careful when you unplug

it and remove it from the

food.

9.2 Inserting the accessories

Wire shelf:

Push the shelf between the guide bars of

the shelf support and make sure that the

feet point down.

Baking tray / Deep pan:

Push the baking tray / deep pan between

the guide bars of the shelf support.

Wire shelf and baking tray / deep pan

together:

Push the baking tray / deep pan between

the guide bars of the shelf support and

the wire shelf on the guide bars above.

www.aeg.com

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

Commentaires sur ces manuels

Pas de commentaire