AEG BS9314001M Manuel d'utilisateur télécharger pdf (Page 42)

2.

Clean the glass cover.

3.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Install the glass cover.

Replacing the lamp on the left side of

the cavity:

1.

Remove the left shelf support.

2.

Use a Torx 20 screwdriver to remove

the cover.

3.

Remove and clean the metal frame

and the seal.

4.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

5.

Install the metal frame and the seal.

Tighten the screws.

6.

Install the left shelf support.

12.5 Cleaning the oven door

Removing the door and the glass panels

You can remove the oven door and the

internal glass panels to clean it. The

number of glass panels is different for

different models.

WARNING!

Be careful when you remove the

door from the appliance. The

door is heavy.

A

A

1.

Open the door fully.

2.

Fully press the clamping levers (A)

on the two door hinges.

3.

Close the oven door to the first

opening position (approximately 70°

angle).

4.

Hold the door with one hand on

each side and pull it away from the

appliance at an up angle.

5.

Put the door with the outer side

down on a soft cloth on a stable sur-

face. This is to prevent scratches.

2

B

1

6.

Hold the door trim (B) on the top

edge of the door at the two sides

and push inwards to release the clip

seal.

7.

Pull the door trim to the front to re-

move it.

42

www.aeg.com

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Commentaires sur ces manuels

Pas de commentaire