AEG BSK892330M Manuel d'utilisateur télécharger pdf (Page 53)

11.4 Steam Cleaning

Remove as much dirt as possible

manually.

Remove the accessories and the shelf

support to clean the side walls.

The steam cleaning functions support

the steam cavity cleaning of the

appliance.

For a better performance

you should start the cleaning

function when the appliance

is cool.

The specified time is related

to the duration of the

function and does not

include the time required for

cleaning of the cavity by the

user.

When the steam cleaning function is

active, the light is off.

1. Fill the water drawer to the maximum

level.

2. Choose the steam cleaning function

in the menu: Cleaning.

Steam Cleaning - the duration of the

function is around 30 minutes.

a) Activate the function.

b) An acoustic signal sounds when

the programme is completed.

c) Press the rotary knob to

deactivate the signal.

Steam Cleaning Plus - the duration

of the function is around 75 minutes.

a) Spray a suitable detergent

uniformly in the oven cavity on

both enamel and steel parts.

Before you start the cleaning

procedure, make sure that the

appliance is cold.

b) Activate the function.

After around 50 minutes an

acoustic signal sounds when the

first part of the programme is

completed.

c) Wipe the internal surface of the

appliance with a non-abrasive

surface care sponge. You can use

warm water or oven detergents

to clean the cavity.

d) The final part of the procedure

starts. The duration of this stage

is around 25 minutes.

3. Wipe the internal surface of the

appliance with a non-abrasive

sponge. You can use warm water to

clean the cavity.

4. Remove the remaining water from

the water drawer.

After cleaning keep the appliance door

open for approximately 1 hour. Wait until

the appliance is dry. To speed up the

drying you can heat up the appliance

with hot air at temperature 150 °C for

approximately 15 minutes. You can get

maximum effects of the cleaning function

if you manually clean the appliance

immediately after the function ends.

11.5 Cleaning Reminder

When reminder is displayed cleaning is

necessary. Perform the function Steam

Cleaning Plus.

11.6 Cleaning the water

drawer

Remove the water drawer from the

appliance.

1. Remove the lid of the water drawer.

Lift the cover in correspondence with

the protrusion in the rear.

XAM

2. Remove the wave-breaker. Pull it

away from the drawer body until it

snaps out.

3. Wash the water drawer parts with

your hands. Use tap water and soap.

Do not use abrasive

sponges. Do not put

water drawer inside a

dish washer.

After you clean the water drawer parts,

reassemble the water drawer.

ENGLISH

53

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 63 64

Commentaires sur ces manuels

Pas de commentaire