![](/jointfilesconvert/1009176/bgc.png)
3. Turn the knob for the temperature
right or left to set the minutes and
press to confirm. Turn the knob
for the temperature right or left to
set the hours and press to
confirm.
When the set Duration time ends the
signal sounds for 2 minutes. and time
setting flash in the display. The oven
turns off automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the oven functions
to the off position.
7.4 Setting the END
1. Set an oven function.
2. Press
again and again until
starts to flash.
3. Turn the knob for the temperature
right or left to set the hours and
press to confirm. Turn the knob
for the temperature right or left to
set the minutes and press
to
confirm.
At the set End time the signal sounds for
2 minutes. and time setting flash in
the display. The oven turns off
automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the oven functions
to the off position.
7.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
again and again until
starts to flash.
3. Turn the knob for the temperature
right or left to set the minutes for
DURATION time and press to
confirm. Turn the knob for the
temperature right or left to set the
hours for DURATION time and press
to confirm.
The display shows flashing .
4. Turn the knob for the temperature
right or left to set the hours for END
time and press
to confirm. Turn
the knob for the temperature right or
left to set the minutes for END time
and press to confirm.
Oven turns on automatically later on,
works for the set DURATION time and
stops at the set END time.
At the set END time the signal sounds
for 2 minutes. and time setting flash
in the display. The oven turns off.
5. Press any button or open the oven
door to stop the signal.
6. Turn the knob for the oven functions
to the off position.
7.6 Setting the MINUTE
MINDER
Minute minder can be both set when the
oven is turned on and off.
1. Press .
and "00" flash in the display.
2. Turn the knob for the temperature
right or left to set the seconds and
than the minutes.
When the time you set is longer than
60 minutes,
flash in the display.
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time the signal
sounds.
5. When the set time ends the signal
sounds for 2 minutes. "00:00" and
flash in the display. Press any
button to stop the signal.
8.
USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
www.aeg.com12
Commentaires sur ces manuels