AEG L61470BI Manuel d'utilisateur télécharger pdf (Page 24)

The programme dial can be turned

either clockwise or anticlockwise.

Off = Reset programme/switching OFF

of the appliance

If you turn the programme

dial to another programme

when the appliance is

working, the yellow indicator

of Start/Pause button flashes

3 times. The display shows

the message Err to indicate

a wrong selection. The

appliance does not perform

the newly selected

programme.

11.4 Starting the programme

without the delay start

Press the Start/Pause button to start the

programme. The corresponding red

indicator stops flashing.

The indicator Washing is on to indicate

that the appliance starts operating.

The indicator Door is on to indicate the

door is locked.

If you have chosen a delayed start with

theDelay start button, the appliance will

begin the countdown.

If you set an incorrect option, the yellow

indicator of the Start/Pause button

flashes 3 times. The display shows the

message Err for some seconds.

11.5 Starting a programme

with the delay start

Set the delay start before starting the

programme.

• After having set all the required

options, press the Delay start button

repeatedly to set the required delay.

The wash programme can be delayed

from 30 min. - 60 min. - 90 min., 2

hours and then by 1 hour up to a

maximum of 20 hours.

The indicator appears on the

display.

• Press the Start/Pause button.

The appliance starts the countdown

of the delay start.

When the countdown is completed,

the programme starts automatically.

The set delay time value appears on

the display for about 3 seconds, then

the duration of the programme

appears again.

You can modify or cancel the delay time

at any moment, before pressing the

Start/Pause button.

The door will be locked throughout the

delay time. If you wish to add laundry in

the appliance during the delay time,

press the Start/Pause button to pause

the appliance. When the Door indicator

goes off , the door can be opened. Add

the laundry, close the door and press the

Start/Pause button again.

Cancelling the delayed start

• Press the Start/Pause button to pause

the appliance;

• Press the Delay start button until the

symbol ’ is displayed;

• Press theStart/Pause button again to

start the programme.

The set delay can be

changed only after you have

set the washing programme

again.

The Delay Start cannot be set with Drain

programme.

11.6 Altering an option or a

running programme

It is possible to change some options

before the programme operate. Before

you make any change, you must press

the Start/Pause button to pause the

appliance.

Changing a running programme is

possible only by resetting it.

Turn the programme dial to Off and then

to the new programme position.

Press the Start/Pause button again to

start the new programme. The washing

water in the tub will not be drained.

www.aeg.com

24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Commentaires sur ces manuels

Pas de commentaire