AEG L61470BI Manuel d'utilisateur télécharger pdf (Page 10)

• Connect the water inlet hose to the cold

water tap with 3/4" thread.

CAUTION!

Make sure that there are no

leaks from the couplings.

Do not use an extension hose if the inlet hose is too short. Contact the

service centre for the replacement of the inlet hose.

3.4 Water drainage

There are different procedures to connect the drain hose:

With the plastic hose guide.

• Make a U shape with the drain hose.

On the edge of a sink

• Make sure that the plastic guide cannot

move when the appliance drains. Attach

the guide to the water tap or the wall.

To a stand pipe with vent-hole

• Directly into a drain pipe at a height of not

less than 60 cm (23.6”) and not more than

100 cm (39.3”). Refer to the illustration.

• The end of the drain hose must always be

ventilated , i.e. the inner diameter of the

drain pipe (min. 38 mm - min. 1.5”) must

be larger than the external diameter of the

drain hose.

www.aeg.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Pas de commentaire

AEG L61470BI Manuel d'utilisateur Page 10