AEG BS9314001M Manuel d'utilisateur télécharger pdf (Page 19)

10.2 Using the Child Lock

The Child Lock prevents an accidental

operation of the appliance.

1. Activate the appliance.

2. Touch and at the same time

until the display shows a message.

To deactivate the Child Lock function

repeat step 2.

10.3 Function Lock

This function prevents an accidental

change of the heating function. You can

activate it only when the appliance

operates.

1. Activate the appliance.

2. Set a heating function or setting.

3. Press again and again until the

display shows: Function Lock.

4. Press

to confirm.

To deactivate the function, press . The

display shows a message. Press

again

and then to confirm.

10.4 Set + Go

The function lets you set a heating

function (or a programme) and use it

later with one press of a sensor field.

1. Activate the appliance.

2. Set a heating function.

3. Press

again and again until the

display shows: Duration.

4. Set the time.

5. Press again and again until the

display shows: Set + Go.

6. Press

to confirm.

Press a sensor field (except for ) to

start the function: Set + Go. The set

heating function starts.

When the heating function ends, an

acoustic signal sounds.

• Function Lock is on when

the heating function

operates.

• The menu: Basic Settings

lets you activate and

deactivate the function: Set

+ Go.

10.5 Automatic Switch-off

For safety reasons the appliance

deactivates automatically after some

time if a heating function operates and

you do not change any settings.

Temperature Switch-off time

30 °C - 115 °C 12.5 h

120 °C - 195 °C 8.5 h

200 °C - 230 °C 5.5 h

The Automatic switch-off does

not work with the functions:

Light, Core temperature

sensor, End Time, Duration.

10.6 Brightness of the display

There are two modes of display

brightness:

• Night brightness - when the appliance

is deactivated, the brightness of the

display is lower between 10 PM and 6

AM.

• Day brightness:

– when the appliance is activated.

– if you touch a sensor field during

the night brightness (apart from

ON / OFF), the display goes back

to the day brightness mode for

the next 10 seconds.

– if the appliance is deactivated and

you set the function: Minute

Minder. When the function ends,

the display goes back to the night

brightness.

10.7 Cooling fan

When the appliance operates, the

cooling fan activates automatically to

keep the surfaces of the appliance cool.

ENGLISH

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Commentaires sur ces manuels

Pas de commentaire