Aeg 47995IQ-MN Manuel d'utilisateur télécharger pdf (Page 10)

Con-

trol

knob

Function

1 - 9 Heat settings (1 - lowest

heat setting, 9 - highest

heat setting)

Double zone

1.

Turn the control knob to a necessary

heat setting.

2.

To complete the cooking process,

turn the control knob to the 0 posi-

tion.

Use the residual heat to decrease

energy consumption. Deactivate

the cooking zone approximately

5 - 10 minutes before the cook-

ing is completed.

5.2 Using the double zone

CAUTION!

To activate the double zone, turn

the knob clockwise. Do not turn

it through the stop position.

1.

Turn the knob clockwise to position

9.

2.

Turn the knob slowly to the symbol

until you can hear a click.

The two cooking zones are on.

3.

To set the necessary heat setting re-

fer to "Heat settings".

5.3 Residual heat indicator

The residual heat indicator comes on

when a cooking zone is hot.

WARNING!

There is a risk of burns from re-

sidual heat.

6. HOB - HELPFUL HINTS AND TIPS

WARNING!

Refer to the Safety chapters.

6.1 Cookware

• The bottom of the cookware

must be as thick and flat as

possible.

• Cookware made of enamelled

steel and with aluminium or

copper bottoms can cause the

colour to change on the glass-

ceramic surface.

6.2 Energy saving

• If it is possible, always put the

lids on the cookware.

• Put cookware on a cooking

zone before you start it.

• Deactivate the cooking zones

before the end of the cooking

time to use residual heat.

• The bottom of pans and cook-

ing zones must have the same

dimension.

6.3 The Examples of cooking

applications

The data in the table is for guidance on-

ly.

10

www.aeg.com

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

Commentaires sur ces manuels

Pas de commentaire