AEG HKH81700FB Manuel d'utilisateur Page 17

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 52
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 16
Problem Possible cause Remedy
The fuse is blown. Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
The hob deactivates. There is water or fat stains
on the control panel.
Clean the control panel.
You put something on the
sensor field .
Remove the object from the
sensor field.
One pot activates two zones. The pot bottom is uneven. Move the pot slightly until
only one zone is detected.
Two or more zones are de-
tected as one zone.
The pots are too close to
each other and the cooking
zones were not set after
placing each pot.
For every pot set the zone
individually after placing the
pot on the cooking zone.
There is no pot indication on
the flexible zone.
The cookware is incorrect. Use the correct cookware.
Refer to “Hints and tips”
chapter.
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct
dimensions.
Refer to “Technical informa-
tion” chapter.
There is already cookware
on the zone.
Move the first pot slightly to
make room for the next one.
Power Boost is not activating
for the pot on the flexible
zone.
The pot is bigger than 240
mm. The maximum power is
reached.
It is normal for this size of
pot. Use smaller pot or use
the highest heat setting for
the big one.
Heat settings for the pots on
flexible zone are reduced.
You are using to many pots
with the highest heat setting
on the flexible zone. Power
management function is acti-
vated.
Move some pots to induc-
tion cooking zones.
comes on.
One of the Lock functions is
active.
To unlock the hob touch let-
ters in alphabetical order A -
O - X.
Pro Cook function deacti-
vates.
You are using more than one
pot.
Use only one pot for the
function.
ENGLISH 17
Vue de la page 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Commentaires sur ces manuels

Pas de commentaire