AEG L9FSC969R Manuel d'utilisateur télécharger pdf (Page 27)

default temperature, the maximum spin

speed, the washing phase indicators

(when available) and an indicative

programme duration.

2. To change the temperature and/or

the spin speed, touch the related

buttons.

3. If desired, set one or more options

by touching the related buttons. The

related indicators come on in the

display and the given information

changes accordingly.

In case a selection is not

possible, no indicator comes

on and an acoustic signal

sounds.

11.5 Starting a programme

Touch the Start/Pause button to start the

programme.

The related indicator stops flashing and

stays on.

In the display, the indicator of the

operating phase starts flashing and the

maximum load indicator goes off.

The programme starts, the door is

locked. The display shows the indicator

.

The drain pump can operate

shortly before the appliance

fills water.

11.6 Starting a programme

with the delay start

1. Touch the Delay Start button

repeatedly until the display shows

the desired delay time. The indicator

comes on.

2. Touch the Start/Pause button.

The appliance starts the countdown of

the delay start.

When the countdown is completed, the

programme starts.

The PROSENSE estimation

starts at the end of the

countdown.

Cancelling the delay start after

the countdown has started

To cancel the delay start:

1. Touch the Start/Pause button to

pause the appliance. The related

indicator flashes.

2. Touch the Delay Start button

repeatedly until the display shows .

3. Touch the Start/Pause button again

to start the programme immediately.

Changing the delay start after

the countdown has started

To change the delay start:

1. Touch the Start/Pause button to

pause the appliance. The related

indicator flashes.

2. Touch the Delay Start button

repeatedly until the display shows

the desired delay time.

3. Touch the Start/Pause button again

to start the new countdown.

11.7 The ProSense load

detection

The programme duration in

the display is referred to a

medium/high load.

After touching the Start/Pause button,

the maximum declared load indicator

goes off, the indicator flashes, the

ProSense starts the laundry load

detection:

1. The appliance detects the load in the

first 30 seconds: the indicator and

the time dots flash, the drum

rotates shortly.

2. At the end of the load detection, the

indicator goes off and the time

dots

stop flashing. The programme

duration will be adjusted accordingly

and could increase or decrease. After

further 30 seconds, the water filling

starts.

At the end of the load detection, in case

of drum overload, the indicator is

flashing in the display:

ENGLISH

27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Commentaires sur ces manuels

Pas de commentaire