USER MANUALEN User ManualWashing MachineL9FSC969R
6. Position the hose directly to a built-indrain pipe in the room wall andtighten it with a clip.You can extend the drain hose tomaximum 400 cm. Conta
4.2 Appliance overview1 2 310678411912 1351Worktop2Detergent dispenser and saltcompartment3Control panel4Door handle5Rating plate6Internal light7Drain
SaltCompartment for salt.Read carefully 'TheWater Softenertechnology ( SoftWater)'.Maximum level for detergent/additives quantity.When selec
4. Touch repeatedly the Stains/Prewashbutton until the desired level appears(from C01 to C07).5. Touch the Start/Pause button toconfirm your choice an
5.3 Pouring saltThe water softener function acts throughspecial resins present in the appliance.To regenerate the resins and make themready to soften
6. BEFORE FIRST USE1. Make sure that all transit bolts havebeen removed from the appliance.2. Make sure that the electrical power isavailable and the
13Temperature touch button (Temp.)7.2 DisplayMIXMaximum load indicator. The icon flashes during laundry load esti-mation (refer to "PROSENSE lo
MIXOKO MIX indicator.Steam phase indicator.Anti-crease phase indicator.Child safety lock indicator.Time saving indicator.Temperature indicator. The
When the display shows the indicators and , the appliance does notheat the water.8.4 Spin When you set a programme, theappliance automatically select
If the Extra Rinse is set as adefault option and youselect a compatible washingprogramme, the displayshows . In this case, bypressing the Extra Rinse
CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...
8.11 Delay Start With this option you can delay the startof a programme in a more convenienttime.Touch the button repeatedly to set therequired delay.
Programme Programme descriptionSteam programmeSteamSteam programme for cotton and synthetic items. Steamcan be used for dried2), washed or worn once l
Programme Programme descriptionOutdoorDo not use fabric softener and make sure thatthere is no softener residue in the detergentdispenser.Synthetic sp
Programme Default temperatureTemperature rangeMaximum spin speedSpin speed rangeMaximum loadSteam- - 1.5 kgOKOPower30 °C60 °C - 30 °C1600 rpm1600 rpm
Cottons Synthetics ColourPro Delicates Wool/Silk Steam OKOPowerAnti-Allergy 20 min. - 3 kg Outdoor Delay Start Plus Steam1)
• You make a wrong selection (3 shortsounds).• The programme is completed(sequence of sounds for about 2minutes).• The appliance has a malfunction(seq
11.3 Filling the detergent andadditivesWe recommend that you donot exceed the maximumindicated level ( ).1. Open the detergent dispenser.Max▼Max▼Max▼S
default temperature, the maximum spinspeed, the washing phase indicators(when available) and an indicativeprogramme duration.2. To change the temperat
In this case, for 30 seconds, it is possibleto pause the appliance and remove theexceeding garments.Once removed the exceeding garments,touch the Star
11.11 Opening the doorIf the temperature and levelof the water in the drum aretoo high and/or the drumstill rotates you cannot openthe door.While a pr
1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f
Press the On/Off button to activatethe appliance again.The display shows the end of the lastset programme.Turn the programme dial to set a newcycle.If
• Always start a washing programmewith the maximum load of laundryallowed.• If you pre-treat the stains, you can usea stain remover when you set aprog
13.6 Cleaning the detergentdispenser and the saltcompartmentBefore cleaning, make surethat the all compartmentsare empty.To prevent possible deposits
6. Insert the detergent drawer into theguide rails and close it. Run therinsing programme without anyclothes in the drum.Max▼Max▼Max▼Salt13.7 Cleaning
5. When the bowl is full of water, closethe drainage duct back and emptythe container.6. Repeat the steps 4 and 5 until thewater stops to flowing out.
13.8 Cleaning the inlet hoseand the valve filterIt is recommended to clean both thefilters of the inlet hose and valveoccasionally to remove any depos
14. TROUBLESHOOTINGWARNING!Refer to Safety chapters.14.1 IntroductionThe appliance does not start or it stopsduring operation.First try to find a solu
Problem Possible solutionThe appliance does notfill with water properly.Make sure that the water tap is open. Make sure that the pressure of the wate
Problem Possible solution Make sure that the washing programme is finished. Set the drain or the spin programme if there is water in thedrum.Make su
After the check, activate the appliance. The programme continues from the point ofinterruption.If the problem occurs again, contact the Authorised Ser
• The ventilation opening in the base (if applicable)must not be covered by a carpet, mat, or any floorcovering.• The appliance must be connected to t
5. Run a cotton or synthetic cycle,without reducing time, to restore thewater softener function.15. CONSUMPTION VALUESThe data in this table are appro
16. TECHNICAL DATADimension Width/ Height/ Depth/Total depth600 mm/ 850 mm/ 630 mm/ 660 mmElectrical connection VoltageOverall powerFuseFrequency230-2
using the correct stacking kitmanufactured and approved by AEG.Verify the compatiblestacking kit by checking thedepth of your appliances.The stacking
ENGLISH 43
www.aeg.com/shop157008570-B-032017
cable. Should the mains cable needto be replaced, this must be carriedout by our Authorised Service Centre.• Connect the mains plug to the mainssocket
3.1 UnpackingWARNING!Remove all the packagingand the transit bolts beforeinstalling the appliance.WARNING!Use the gloves.1. Remove the external film.
CAUTION!Do not use alcohol, solventsor chemical products.9. Make sure to identify the differentsizes and the positions of the soundbarriers. Refer to
To limit vibration we recommend placinga waterproof wooden panel, at least 15mm thick, under the appliance. It shouldbe screwed to at least 2 floor be
Do not use an extensionhose if the inlet hose is tooshort. Contact the servicecentre for the replacementof the inlet hose.3.5 Water drainageThe drain
Commentaires sur ces manuels