AEG L9FEA966C Manuel d'utilisateur télécharger pdf (Page 36)

If is on: the water

temperature and level are

not high and it is still

possible to open the door

and add clothes.

While a programme or the delay start

operates, the appliance door is locked.

1. Touch the Start/Pause button .

In the display the related door lock

indicator goes off.

2. Open the appliance door. If

necessary, add or remove the items.

3. Close the door and touch the Start/

Pause button.

The programme or the delay start

continues.

13.13 End of the programme

When the programme has finished, the

appliance stops automatically. The

acoustic signals operate (if they are

active).

The display tells that the cycle is finished

and shows 0h00min.

The Start/Pause button goes off.

The door unlocks and the indicator

goes off.

1. Press the On/Off button to

deactivate the appliance.

After five minutes after the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

shows the end of the last

selected programme. Turn

the programme dial to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent

dispenser slightly ajar to prevent

mildew and odours.

5. Close the water tap.

13.14 Draining water out after

end of cycle

If you have chosen a programme or an

option that does not empty out the

water of the last rinse, the programme is

completed, but:

• The display shows 0 min and the

Start/Pause button starts flashing.

• The drum still turns at regular intervals

to prevent the creases in the laundry.

• The indicator is still on and the

door stays locked.

• You must drain the water to open the

door:

1. Touch the Start/Pause button:

• If you have set

, the appliance

drains the water and spins.

• If you have set

, the appliance

only drains the water.

2. If necessary, change the spin speed

proposed by the appliance: touch

the Start/Pause button to pause the

programme; tap on and then on

the Spin Speed bar.

3. When the programme is completed

and the door locked indicator

goes off, you can open the door.

4. Press the On/Off button for a few

seconds to deactivate the appliance.

In any case, the appliance

empties the water out

automatically after

approximately 18 hours.

14. SETTINGS

14.1 Introduction

1. In the programme summary screen,

just tap on the screen to return to the

programme list screen.

2. Scroll the list up or down to find

Settings.

www.aeg.com36

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

Commentaires sur ces manuels

Pas de commentaire