AEG L9FEA966C Manuel d'utilisateur télécharger pdf (Page 35)

The shortcut shows up. Keep

pressed for about three seconds to

deactivate the Child Lock.

Starting a programme with

delay start

1. Touch the Start/Pause button to

start the programme.

The related led stops flashing and stays

on.

The door is locked.

The appliance starts the countdown and

the door is locked.

Cottons 40

1h29min

Finished at 15:36

Starts in

Reset

2. Tap on Reset to cancel the delay

start and then touch the Start/Pause

button or wait until the countdown is

completed.

The programme will start normally.

The ProSense detection

starts at the end of the

countdown.

During the cycle, the display

will inform you about each

running phase (e.g. washing,

rinsing and so on).

13.9 The ProSense load

detection

After touching the Start/Pause button:

1. The ProSense starts the laundry load

detection to calculate the real

programme duration. The display

shows the message Adjusting

programme to current load.

The appliance adjusts automatically

the programme duration to the load

to achieve perfect washing results in

the minimum possible time. The

programme duration could increase

or decrease.

2. After about 20 minutes the display

shows the new programme duration,

the expected programme time and

advise you about the running phase.

The ProSense detection is

carried out with complete

washing programmes only.

13.10 Interrupting a

programme and changing the

options

When the programme is running, you

can change only some options:

1. Touch the Start/Pause button .

The related led start flashing.

2. Tap on

to change the options.

In the option list only the available

options will be active.

3. Touch the Start/Pause button again.

The washing programme continues and

the programme duration can change.

13.11 Cancelling a running

programme

1. Press the On/Off button to cancel

the programme and to deactivate

the appliance.

2. Press the On/Off button again to

activate the appliance.

Now, you can set a new washing

programme.

If the ProSense phase is

already carried out and the

water filling is already

started, the new programme

starts without repeating

the ProSense phase. The

water and the detergent are

not drained out in order to

avoid waste.

13.12 Opening the door

If the temperature and level

of the water in the drum are

too high and/or the drum

still rotates you cannot open

the door.

ENGLISH 35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 55 56

Commentaires sur ces manuels

Pas de commentaire