AEG BSE577321M Manuel d'utilisateur télécharger pdf (Page 37)

Problem Possible cause Remedy

The display shows an error

code that is not in this table.

There is an electrical fault. • Deactivate the oven with

the house fuse or the

safety switch in the fuse

box and activate it again.

• If the display shows the

error code again, contact

the Customer Care De-

partment.

There is water inside the

oven.

There is too much water in

the tank.

Deactivate the oven and

wipe the water with a cloth

or sponge.

The indicator "Tank Full"

is off.

There is not enough water in

the tank.

Fill the tank with water until

the indicator comes on. If

water starts to come out in-

side the oven, and the indi-

cator is still off, contact a

qualified service engineer.

The indicator "Tank Empty"

is on.

There is no water in the tank. Fill the tank. If the indicator

is still on, contact a qualified

service engineer.

The steam cooking does not

work.

Lime obstructs the hole. Check the steam inlet open-

ing. Remove the lime.

The steam cooking does not

work.

There is no water in the tank. Fill the water tank.

It takes more than three mi-

nutes to empty the water

tank or the water leaks from

the steam inlet opening.

There are lime deposits in

the oven.

Clean the water tank. Refer

to "Cleaning the water

tank".

ENGLISH 37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Commentaires sur ces manuels

Pas de commentaire

AEG BSE577321M Manuel d'utilisateur Page 37

Commentaires sur ces manuels

Produits connexes et manuels pour Non AEG BSE577321M