AEG HVB95450IB Manuel d'utilisateur télécharger pdf (Page 9)

CAUTION!

It is important to install the

elbow correctly, with the

shoulder on the end of the

thread, fitted to the hob

connecting pipe.

CAUTION!

Failure to ensure the correct

assembly will cause leakage

of gas.

CAUTION!

Make sure that the gas

supply pressure of the

appliance obeys the

recommended values.

Rigid connection:

Carry out connection by using metal rigid

pipes (copper with mechanical end).

3.4 Injectors replacement

1. Remove the pan supports.

2. Remove the caps and crowns of the

burner.

3. With a socket spanner 7 remove the

injectors and replace them with the

ones which are necessary for the type

of gas you use (see table in

"Technical Data" chapter).

4. Assemble the parts, follow the same

procedure backwards.

5. Replace the rating plate (it is near the

gas supply pipe) with the one for the

new type of gas supply. You can find

this plate in the package supplied

with the appliance.

If the supply gas pressure is changeable

or different from the necessary pressure,

you must fit an applicable pressure

adjuster on the gas supply pipe.

3.5 Gas selection

1. Touch for 3 seconds.

2. Within 7 seconds, touch for 3

seconds.

3. Touch 3 times.

The display shows G1 mode.

4. Touch

.

To enter the mode.

5. Timer display shows selected gas

type.

6. Touch to set the gas type

according to table below.

7. Touch .

To confirm the gas type.

Touch

to exit the mode or wait for

Automatic Switch Off function activates.

Gas selection

0 1 2

G20 20 mbar Liquid gas 29 mbar Safety risk, do not use 2 gas se-

lection. Use only 0 or 1 gas se-

lections depend on gas supply.

3.6 Adjustment of minimum

level

WARNING!

Information for authorised

installer only.

Switch off the hob before

the adjustment.

To adjust the minimum level of the

burners:

1. Touch for 3 seconds.

2. Within 7 seconds, touch for 3

seconds.

3. Touch 4 times.

The display shows G2 mode.

4. Touch

.

To enter the mode.

5. Wait 5 seconds, after selecting the

mode.

The burner shows minimum level and the

control bar shows

.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Commentaires sur ces manuels

Pas de commentaire