AEG HVB95450IB Manuel d'utilisateur télécharger pdf (Page 22)

Do not lift the pan supports

at an angle, as this will put

strain on the metal pins. This

can cause damage to the

pins and cause them to

break.

The shape of pan supports and the

amount of burners can be different in

other models of the appliance.

7.4 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage

to the hob. Take care to avoid burns.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration.

Clean the hob with a moist cloth and

a non-abrasive detergent. After

cleaning, wipe the hob dry with a soft

cloth.

• To clean the enamelled parts, caps

and crowns, wash them with warm

soapy water and dry them carefully

before you put them back on.

7.5 Cleaning the ignition

candle and the flame safety

device

Keep the metal part of the ignition

candle and the flame safety device

cleaned with a moist cloth or sponge to

prevent difficult lightning or difficult

flame recognition. Check if the burner

crown is not blocked with food residues.

7.6 Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the

conditions of the gas supply pipe and

the pressure adjuster, if fitted.

8.

TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

www.aeg.com22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire