Aeg HG694340XB Manuel d'utilisateur télécharger pdf (Page 17)

• Be very careful when you replace the pan supports to prevent the hob top from

damage.

After cleaning, dry the appliance with a soft cloth.

Removing the dirt:

1. – Remove immediately: melting plastic, plastic foil, and food containing sugar.

– Stop the appliance and let it cool down before you clean: limescale rings, water

rings, fat stains, shiny metallic discolorations. Use a special cleaner applicable for

surface of hob.

2. Clean the appliance with a damp cloth and some detergent.

3. At the end rub the appliance dry with a clean cloth.

The stainless steel can become tarnished if it is too much heated. Refer to this you must not

cook with potstones, earthenware pans or cast iron plates. Do not use aluminium foil to

prevent damage the top during operation.

Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle with a metal electrode. Keep

these components well clean to prevent difficult lighting and check that the burner crown

holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to check the conditions of the gas supply

pipe and the pressure adjuster, if fitted.

WHAT TO DO IF…

Problem Possible cause Remedy

There is no spark when lighting

the gas

• There is no electrical supply • Make sure that the unit is

connected and the electrical

supply is switched on.

• Control the fuse. If the fuse

is released more than one

time, refer to a qualified

electrician.

What to do if… 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Aeg HG694340XB Manuel d'utilisateur Page 17