HC452020EBENHOB USER MANUAL
sensor field function11It sets the cooking zone for the Timer functions.12It sets the Timer functions.13a control bar To set the heat setting.14It a
Automatic Switch Off timesHeat setting - - - - Stops after 6 hours 5 hours 4 hours 1.5 hoursThe heat settingTouch the control bar at the heat
The selection of Timer function is possible for cooking zones that are active and the heatsetting is set.• To set the cooking zone: touch again and a
STOP+GOThe function sets all cooking zones that operate to the lowest heat setting - Keep Warm( ).When operates, you cannot change the heat settin
Activation of the soundsDeactivate the appliance.Touch for 3 seconds. The displays come on and go out. Touch for 3 seconds. comes on, because the s
HeatsettingUse to: Time Hints9-12 Gentle fry: escalope, veal cordon bleu,cutlets, rissoles, sausages, liver, roux,eggs, pancakes, doughnutsas re-quire
WARNING!• Do not use the scraper or sharp objects to cleanthe glass bar and the space between it andglass ceramic. Glass bar is attached to the ce-ram
If you tried the above solutions and cannot repair the problem, speak to your dealer or theCustomer Care Department. Give the data from the rating pla
FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno
www.aeg.com/shop 892934846-C-062011
CONTENTS4 Safety information5 Installation instructions9 Product description10 Operating instructions14 Helpful hints and tips15 Care and cleaning16 W
SAFETY INFORMATIONFor your safety and correct operation of the appliance, read this manual carefully beforeinstallation and use. Always keep these in
• Do not let cookware boil dry to prevent the damage to cookware and glass ceramics.• Do not use the cooking zones with empty cookware or without cook
• A qualified electrician must install the clamping connections correctly.• Use a strain relief clamp on cable.• Use the correct mains cable of type H
min.28 mm • Seal the gap between the worktop and glass ceramic with silicone.• Put some soapy water on the silicone.• Pull off the excess silicone wi
6. Loosely turn in fixing plates from below on the worktop and on the connection bar.7. Put the subsequent appliance in the worktop cut out . Make sur
PRODUCT DESCRIPTIONGeneral overview132120/175/210mm145mm41 Triple cooking zone 800/1600/2300W2 Cooking zone 1200W3 Glass bar4 Control panelControl pan
Commentaires sur ces manuels