AEG DC7003000M Manuel d'utilisateur télécharger pdf (Page 12)

SYM-

BOL

FUNCTION DESCRIPTION

Time of day To set, change or control the time of day.

• If you set a clock function, the symbol

flashes for approximately 5 seconds. In

these 5 seconds, touch

or to set

the time.

• If you set the time, the symbol contin-

ues to flash for approximately 5 sec-

onds. After these 5 seconds, the sym-

bol comes on. The time starts to count

down.

7.2 Setting the clock functions

1.

Switch on the appliance.

2.

Use again and again until the dis-

play shows the necessary clock func-

tion and the related symbol, for ex-

ample Minute Minder

.

3.

Use or to set the necessary

time.

You can hear an acoustic signal for 2

minutes when the time is comple-

ted, “00.00” and the related function

indicator flash. The appliance

switches off.

4.

Use any sensor field to switch off the

acoustic signal.

With Minute Minder the oven

must be switched on to set the

clock function.

With Duration and End the

oven switches off automatically.

With Duration

and End

you must set the oven function

and the temperature first, then

you can set the clock function.

7.3 Heat+Hold (if applicable)

To keep the prepared food warm for 30

minutes, after the cooking is completed.

Switching on Heat+Hold

1.

Set clock functions Duration and/

or End

.

2.

Use Selection again and again,

until the display shows the symbol

Keep warm

.

3.

Use , the display shows “00:30”

4.

When the set oven function is com-

pleted, a signal sounds and Heat

+Hold starts. The set oven function

operates at 80°C for 30 minutes. The

oven then switches off automatically.

The temperature for the set oven

function must be above 80°C.

8. ADDITIONAL FUNCTIONS

8.1 Cooling fan

When the appliance operates, the cool-

ing fan switches on automatically. If you

switch off the appliance, the cooling fan

continues to operate until the appliance

cools down.

8.2 Switch-on lock

WARNING!

When the switch-on lock is set,

you can not operate the oven.

Switching on the switch-on lock

1.

Switch on the appliance. No oven

function must be set.

2.

Use Selection and at the same

time, until the display shows

“SAFE”. The switch-on lock is

switched on.

Switching off the switch-on lock

1.

If necessary, switch on the appliance.

2.

Use Selection and at the same

time, until the display stops to show

"SAFE". The switch-on lock switches

off.

12

www.aeg.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Commentaires sur ces manuels

Pas de commentaire