AEG BS9314001M Manuel d'utilisateur télécharger pdf (Page 18)

8. Remove the core temperature sensor

plug from the socket and remove the

dish from the appliance.

WARNING!

There is a risk of burns as the

core temperature sensor

becomes hot. Be careful

when you unplug it and

remove it from the food.

Food category: casserole

1. Activate the appliance.

2. Place half of the ingredients in a

baking dish.

3. Insert the tip of the core temperature

sensor exactly in the centre of the

casserole. The core temperature

sensor should be stabilized in one

place during baking. Use a solid

ingredient to achieve that. Use the

rim of the baking dish to support the

silicone handle of the core

temperature sensor. The tip of the

core temperature sensor should not

touch the bottom of a baking dish.

4. Cover the core temperature sensor

with the remaining ingredients.

5. Put the plug of the core temperature

sensor into the socket located in the

front frame of the appliance.

The display shows the core temperature

sensor symbol.

6. Use the shuttle in less than 5 seconds

to set the food type.

7. Set a heating function and, if

necessary, the oven temperature.

8. To change the food core

temperature, press

.

When the dish is at the set temperature,

an acoustic signal sounds. The appliance

deactivates automatically.

9. Touch any symbol to stop the signal.

10. Remove the core temperature sensor

plug from the socket and remove the

dish from the appliance.

WARNING!

There is a risk of burns as the

core temperature sensor

becomes hot. Be careful

when you unplug it and

remove it from the food.

10.2 Inserting the accessories

CAUTION!

Do not use the baking tray

or deep pan with the Full

Steam function.

Wire shelf:

Push the shelf between the guide bars of

the shelf support and make sure that the

feet point down.

www.aeg.com

18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Commentaires sur ces manuels

Pas de commentaire