AEG ABE81826NC Manuel d'utilisateur télécharger pdf (Page 26)

Problem Possible cause Solution

The temperature in the ap-

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera-

ture.

The food products' tem-

perature is too high.

Let the food products temper-

ature decrease to room tem-

perature before storage.

The door has been

opened often.

Open the door only if necessa-

ry.

The FROSTMATIC function

or COOLMATIC function is

switched on.

Refer to "FROSTMATIC func-

tion" or "COOLMATIC func-

tion".

There is no cold air circula-

tion in the appliance.

Make sure that there is cold air

circulation in the appliance.

If the advice does not lead

to the desired result, contact

the nearest Authorised

Service Centre.

7.2 Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

assembly instructions.

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

8. INSTALLATION

8.1 Location

Refer to the assembly

instructions for the

installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

8.2 Positioning

Install the appliance in a dry, well

ventilated indoors where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance.

Climate

class

Ambient temperature

SN +10°C to + 32°C

Climate

class

Ambient temperature

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only

be guaranteed within the

specified temperature

range. If you have any

doubts regarding where to

install the appliance, please

turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.

www.aeg.com26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Commentaires sur ces manuels

Pas de commentaire