AEG ABE81826NC Manuel d'utilisateur télécharger pdf (Page 20)

It is possible to change predefined

sound of buttons by pressing together

Mode and temperature colder button for

a few seconds. Change is reversible.

3.2 Display

A CB

DEF

A. Timer indicator

B. FROSTMATIC function

C. Temperature indicator

D. Alarm indicator

E. ChildLock function

F. DrinksChill function

3.3 Switching on

1. Connect the mains plug to the power

socket.

2. Press the appliance ON/OFF if the

display is off. The temperature

indicators show the set default

temperature.

The alarm buzzer could

operate after few seconds.

To reset the alarm refer to

"High temperature alarm".

To select a different set temperature

refer to "Temperature regulation".

If "dEMo" appears on the display, refer

to "Troubleshooting" .

3.4 Switching off

1. Press the appliance ON/OFF for 5

seconds.

The display switches off.

2. Disconnect the mains plug from the

power socket.

3.5 Temperature regulation

Set the temperature of the appliance by

pressing the temperature regulators.

Default set temperature:

• -18°C for the freezer

The temperature indicators show the set

temperature.

The set temperature will be

reached within 24 hours.

After a power failure the set

temperature remains stored.

3.6 High temperature alarm

An increase in the temperature in the

freezer compartment (for example due to

an earlier power failure) is indicated by

flashing the alarm icon and freezer

temperature indicators, and sounding of

buzzer.

Press any button.

The buzzer switches off.

The freezer temperature indicator shows

the highest temperature reached for a

few seconds, then displays the set

temperature again.

The alarm indicator

continues to flash until the

normal conditions are

restored.

3.7 FROSTMATIC function

The FROSTMATIC function accelerates

the freezing of fresh food and, at the

same time, protects foodstuffs already

stored from undesirable warming.

1. To activate this function press the

Mode button until the corresponding

icon appears.

The FROSTMATIC indicator flashes.

2. Press the OK button to confirm.

TheFROSTMATIC indicator is shown.

This function stops automatically after 52

hours.

To switch off the function before its

automatic end repeat the procedure

until the FROSTMATIC indicator turns

off.

The function switches off by

selecting a different set

temperature.

www.aeg.com20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Commentaires sur ces manuels

Pas de commentaire