AEG LAVALOGIC1600 Manuel d'utilisateur télécharger pdf (Page 60)

Water inflow

A pressure hose 1.5m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set

of hoses with fitted hose screw connections offered by our Customer

Service is permissible.

– Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing

machines without Aqua-Control.

– Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash-

ing machines with Aqua-Control.

Caution! Never cut into pieces in order to extend the hoses!

3 Sealing rings are supplied either

in the plastic nuts of the hose

screw connection or in the en-

closed pack. Do not use other

seals!

1. Connect the hose with the angled

connection to the machine.

Caution!

– Do not lay the infeed hose ver-

tically downwards. Instead, turn

it to the right or left as shown

in the diagram.

– Tighten the hose connection

only by hand.

2. Connect the hose with the

straight connection to a water

tap with a R 3/4 (inch) screw

thread.

Caution! Only tighten the screw

connection manually.

3. By slowly opening the water tap

before putting the washing ma-

chine into operation, check that

the connection is free of leaks.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 71 72

Pas de commentaire

AEG LAVALOGIC1600 Manuel d'utilisateur Page 60