AEG SKD71800F0 Manuel d'utilisateur télécharger pdf (Page 13)

7.2 Electrical Connection

CAUTION!

Any electrical work required to

install this appliance should be

carried out by a qualified electri-

cian or competent person.

WARNING!

This appliance must be earthed.

The manufacturer declines any li-

ability should these safety meas-

ures not be observed.

AB

C

D

E

The wires in the mains lead are

coloured in accordance with the

following code:

A Green and Yellow: Earth

CBrown: Live

E Blue: Neutral

As the colours of the wires in the mains

lead of this appliance may not corre-

spond with the coloured markings iden-

tifying the terminals in your plug, pro-

ceed as follows:

1.

Connect the wire coloured green

and yellow to the terminal marked

either with the letter “E“ or by the

earth symbol

or coloured green

and yellow.

2.

Connect the wire coloured blue to

the terminal either marked with the

letter “N“ or coloured black.

3.

Connect the wire coloured brown to

the terminal either marked with the

“L“ or coloured red.

4.

Check that no cut, or stray strands of

wire is present and the cord clamp D

is secure over the outer sheath.

5.

Make sure the electricity supply volt-

age is the same as that indicated on

the appliance rating plate.

6.

Switch on the appliance.

The appliance is supplied with a 13 amp

plug fitted B. In the event of having to

change the fuse in the plug supplied, a

13 amp ASTA approved (BS 1362) fuse

must be used.

WARNING!

A cut off plug inserted into a 13

amp socket is a serious safety

(shock) hazard. Ensure that it is

disposed of safely.

7.3 Ventilation requirements

5 cm

min.

200 cm

2

min.

200 cm

2

The airflow behind the appliance must

be sufficient.

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire