AEG BS9314001M Manuel d'utilisateur télécharger pdf (Page 17)

With some programmes turn

over the food after 30

minutes. The display shows a

reminder.

9. USING THE ACCESSORIES

WARNING!

Refer to Safety chapters.

9.1 Core temperature sensor

There are two temperatures to be set:

the oven temperature and the core

temperature.

The core temperature sensor measures

the core temperature of the meat. When

the meat is at the set temperature, the

appliance deactivates.

CAUTION!

Only use the core

temperature sensor supplied

or the correct replacement

parts.

The core temperature sensor

must stay in the meat and in

the socket during the cooking.

1. Activate the appliance.

2. Put the tip of the core temperature

sensor into the centre of the meat.

3. Put the plug of the core temperature

sensor into the socket at the front of

the appliance.

The display shows the core temperature

sensor symbol.

4. Use the shuttle in less than 5 seconds

to set the core temperature.

5. Set the heating function and, if

necessary, the oven temperature.

The appliance calculates an approximate

end time. The end time is different for

the different quantities of the food, the

set oven temperatures (minimum 120 °C)

and the operating modes. The appliance

calculates the end time in approximately

30 minutes.

6. To change the core temperature,

press

.

When the meat is at the set core

temperature, an acoustic signal sounds.

The appliance deactivates automatically.

7. Touch a sensor field to stop the

signal.

8. Remove the core temperature sensor

plug from the socket and remove the

meat from the oven.

WARNING!

The core temperature sensor

is hot. There is a risk of burns.

Be careful when you remove

the tip and the plug of the

core temperature sensor.

9.2 Inserting the accessories

CAUTION!

Do not use the baking tray or

deep pan with the function:

Full Steam.

Wire shelf:

Push the shelf between the guide bars of

the shelf support and make sure that the

feet point down.

ENGLISH

17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Commentaires sur ces manuels

Pas de commentaire