AEG UN 6.03 Informations techniques télécharger pdf (Page 59)

Practical A.E.G Upgrade 2006

The shorter spring shown above is basically a M120 with one third of it chopped

away. It is now much shorter than the “normal” TM spring. 3 ball bearing spacers

are to be placed in the piston – the inner diameter of these bearings is large

enough to avoid crashing with the spring guide.

This “short setting” is very easy to install, and is capable of offering a FPS of

approximately 325~335 (compare to the TM default of 290~300) with a higher

ROF (as the stiff nature of the spring allows faster decompression).

Based on our experience, the “short setting” also produces much less stress on

the first several teeth of the piston, meaning the piston can last longer.

Stock TM spring, piston

and spring guide.

A short stiff spring, a ball bearing spring

guide and several ball bearing spacers.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 156 157

Pas de commentaire

AEG UN 6.03 Informations techniques Page 59