AEG UN 6.03 Informations techniques télécharger pdf (Page 79)

Practical A.E.G Upgrade 2006

We do not see any reason why you should use a “metallic” piston head. The stock

piston head is good at absorbing much of the impact generated by the spring on

the mechbox shell. You should not need to replace the piston head unless the

stock one breaks or that a bore-up cylinder is to be used. The replacement

piston head does not have to be a metallic one though.

A silent head set has a bumper-rubber installed in both the cylinder head and

piston head. While it can reduce noise a little bit, beware that noise also come

from the other parts of the mechbox and also from the motor. You need custom

works on the gun to achieve total noise reducton. The Japanese are very good at

doing this, but the cost involved is very high.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 156 157

Pas de commentaire

AEG UN 6.03 Informations techniques Page 79