AEG BP7304021M Manuel d'utilisateur télécharger pdf (Page 40)

14. INSTALLATION

WARNING!

Refer to the Safety chapters.

The built-in unit must meet the

stability requirements of DIN

68930.

The oven is designed to be connected

to 230 - 240V ~ (50Hz) electricity supply.

The oven has an easily accessible termi-

nal block which is marked as follows:

Letter L - Live terminal

Letter N - Neutral terminal

- Earth terminal

CAUTION!

This oven must be earthed!

The cable used to connect the oven to

the electrical supply must comply to the

specifications given below.

For UK use only

Connection via Min. size Cable/

flex

Cable/flex type Fuse

Cooker Control

Circuit

2,5 mm² PVC / PVC twin

and earth

min: 15 A

max: 20 A

It is necessary that you install a double

pole switch between the oven and the

electricity supply (mains), with a mini-

mum gap of 3 mm between the switch

contacts and of a type suitable for the

required load in compliance with the

current regulations.

The switch must not break the yellow

and green earth cable at any point.

After installation and connecting,

the cable must be placed so that

it cannot at any point reach a

temperature of more than 50°C

above the ambient temperature.

Before the oven is connected,

check that the main fuse and the

domestic installation can support

the load; and that the power sup-

ply is properly earthed.

The manufacturer declines any respon-

sibility should these safety measures

not be carried out.

min.

3 mm

40

www.aeg.com

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Commentaires sur ces manuels

Pas de commentaire