AEG BP7304021M Manuel d'utilisateur télécharger pdf (Page 37)

12.3 Lamp

WARNING!

There is a risk of electrical shock.

The lamp and the lamp glass

cover can be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the

interior of the appliance. It pre-

vents damage to the lamp glass

cover and the cavity.

Always use the same lamp type.

Replacing the lamp at the cavity

ceiling:

1.

Turn the lamp glass cover counter-

clockwise to remove it.

2.

Clean the glass cover.

3.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Install the glass cover.

Replacing the lamp on the left side of

the cavity.

1.

Remove the left shelf support.

2.

Use a narrow, blunt object (e.g. a

teaspoon) to remove the glass cov-

er. Clean the glass cover.

3.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Install the glass cover.

5.

Install the left shelf support.

12.4 Cleaning the oven door

Removing the door and the glass panels

You can remove the oven door and the

internal glass panels to clean it. The

number of glass panels is different for

different models.

WARNING!

Be careful when you remove the

door from the appliance. The

door is heavy.

A

A

1.

Open the door fully.

2.

Fully press the clamping levers (A)

on the two door hinges.

3.

Close the oven door to the first

opening position (approximately 70°

angle).

4.

Hold the door with one hand on

each side and pull it away from the

appliance at an up angle.

5.

Put the door with the outer side

down on a soft cloth on a stable sur-

face. This is to prevent scratches.

ENGLISH 37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Commentaires sur ces manuels

Pas de commentaire