AEG HK874400FB Manuel d'utilisateur télécharger pdf (Page 8)

4. DAILY USE

4.1 Activation and

deactivation

Touch for 1 second to activate or de-

activate the appliance.

The control panel comes on after you ac-

tivate the appliance and goes off after

you deactivate the appliance.

When the appliance is deactivated you

can see only

sensor field.

4.2 Automatic Switch Off

The function deactivates the appliance

automatically if:

•

All cooking zones are deactivated (

).

• You do not set the heat setting after

you activate the appliance.

• You spill something or put something

on the control panel for more than 10

seconds, (a pan, a cloth, etc.). An

acoustic signal sounds some time and

the appliance deactivates. Remove the

object or clean the control panel.

• The appliance becomes too hot (e.g.

when, a saucepan boils dry). Before

you use the appliance again, wait for

the cooking zone to cool down.

• You use incorrect cookware. The sym-

bol

comes on and the cooking

zone deactivates automatically after 2

minutes.

• You do not deactivate a cooking zone

or change the heat setting. After some

time

comes on and the appliance

deactivates. See below.

• The relation between heat setting and

times of the Automatic Switch Off

function:

•

, - — 6 hours

•

- — 5 hours

•

- — 4 hours

•

- — 1.5 hours

4.3 The heat setting

Touch the control bar at the heat set-

ting. Change clockwise or counterclock-

wise, if it is necessary. Do not release be-

fore you have a correct heat setting. The

display shows the heat setting.

4.4 Grill Function

Use the Grill Function with the

Maxisense Plancha Grill accesso-

ry

1)

.

The Grill Function connects two right

side cooking zones under the accessory

and they operate as one.

First set the heat setting for one of the

cooking zones.

To activate the Grill Function, touch

.

To set or change the heat setting, touch

one of the control sensors.

To deactivate the Grill Function, touch

. The cooking zones operate inde-

pendently.

4.5 Automatic Heat Up

You can get a necessary heat setting in a

shorter time if you activate the Automat-

ic Heat Up function. This function sets

the highest heat setting for some time

(see the diagram), and then decreases to

the necessary heat setting.

To start the Automatic Heat Up function

for a cooking zone:

1.

Touch ( comes on in the dis-

play).

1)

The Maxisense Plancha Grill accessory is not supplied with the appliance. For more in-

formation, please contact your local supplier.

8

www.aeg.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Commentaires sur ces manuels

Pas de commentaire