AEG HK634060XB Manuel d'utilisateur télécharger pdf (Page 14)

Problem Possible cause Remedy

Automatic Heat Up does not

operate.

The zone is hot. Let the zone become suffi-

ciently cool.

The highest heat setting is

set.

The highest heat setting has

the same power as the func-

tion.

You decreased the heat set-

ting to 0.

Start from 0 and increase the

heat setting.

You cannot activate the out-

er ring.

First, activate the inner ring

by changing the heat set-

ting.

There is a dark area on

the multiple zone.

It is normal that there is a

dark area on the multiple

zone.

The sensor fields become

hot.

The cookware is too large or

you put it too near to the

controls.

Put large cookware on the

rear zones, if possible.

comes on.

Child Safety Device or Lock

operates.

Refer to "Daily use".

and a number come on.

There is an error in the hob. Deactivate the hob and acti-

vate it again after 30 sec-

onds. If comes on again,

disconnect the hob from the

electrical supply. After 30

seconds, connect the hob

again. If the problem contin-

ues, speak to an Authorised

Service Centre.

You can hear a constant

beep noise.

The electrical connection is

incorrect.

Disconnect the hob from the

electrical supply. Ask a quali-

fied electrician to check the

installation.

comes on.

The second phase of the

power supply is missing.

Check if the hob is correctly

connected to the electrical

supply. Remove the fuse,

wait one minute, and insert

the fuse again.

8.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Give also

three digit letter code for the glass

ceramic (it is in the corner of the glass

surface) and an error message that

comes on. Make sure, you operated the

hob correctly. If not the servicing by a

service technician or dealer will not be

free of charge, also during the warranty

www.aeg.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire