AEG 47056VS-WN Manuel d'utilisateur télécharger pdf (Page 27)

2. Pull the rear end of the shelf support

away from the side wall and remove

it.

2

1

The retaining pins on the

telescopic runners must

point to the front.

Install the shelf supports in the opposite

sequence.

CAUTION!

Make sure that the longer

fixing wire is in the front. The

ends of the two wires must

point to the rear. Incorrect

installation can cause

damage to the enamel.

11.4 Removing the oven door

To make the cleaning easier, remove the

door.

1

2

1. Open the door fully.

2. Move the slider until you hear a click.

3. Close the door until the slider locks.

4. Remove the door.

To remove the door, pull the door

outwards first from one side, and

then the other.

When the cleaning procedure is

completed, insert the oven door in the

opposite sequence. Make sure that you

hear a click when you insert the door.

Use force if necessary.

11.5 Removing and cleaning

the door glasses

The door glass in your

product can be different in

type and shape from the

examples you see in the

images. The number of

glasses can also be different.

1. Hold the door trim B on the top

edge of the door at the two sides

and push inwards to release the clip

seal.

1

2

B

2. Pull the door trim to the front to

remove it.

3. Hold the door glass panels on their

top edge one by one and pull them

upwards from the guide.

ENGLISH

27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Commentaires sur ces manuels

Pas de commentaire