AEG S83600CMW1 Manuel d'utilisateur télécharger pdf (Page 16)

Problem Possible cause Solution

The compressor op-

erates continually.

The Temperature regula-

tor may be set incorrectly.

Set a warmer temperature.

The door is not closed

correctly.

Refer to "Closing the

door".

The door has been

opened too frequently.

Do not keep the door

open longer than necessa-

ry.

The product temperature

is too high.

Let the product tempera-

ture decrease to room

temperature before stor-

age.

The room temperature is

too high.

Decrease the room tem-

perature.

The FROSTMATIC func-

tion is switched on.

Refer to "FROSTMATIC

function".

The COOLMATIC func-

tion is switched on.

Refer to "COOLMATIC

function".

Water flows on the

rear plate of the re-

frigerator.

During the automatic de-

frosting process, frost de-

frosts on the rear plate.

This is correct.

Water flows into the

refrigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Products prevent that wa-

ter flows into the water

collector.

Make sure that products

do not touch the rear

plate.

Water flows on the

ground.

The melting water outlet

does not flow in the evap-

orative tray above the

compressor.

Attach the melting water

outlet to the evaporative

tray.

There is too much

frost and ice.

Products are not wrapped

properly.

Wrap the products better.

The door is not closed

correctly.

Refer to "Closing the

door".

The temperature in the

refrigerator is too low.

Set a higher temperature.

The temperature in

the appliance is too

high.

The door is not closed

correctly.

Refer to "Closing the

door".

The product temperature

is too high.

Let the product tempera-

ture decrease to room

temperature before stor-

age.

Many products are stored

at the same time.

Store less products at the

same time.

16

www.aeg.com

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire