AEG S83600CMW1 Manuel d'utilisateur télécharger pdf (Page 18)

8.2 Location

A

B

100 mm

min

20 mm

The appliance should be installed well

away from sources of heat such as radia-

tors, boilers, direct sunlight etc. Ensure

that air can circulate freely around the

back of the cabinet. To ensure best per-

formance, if the appliance is positioned

below an overhanging wall unit, the min-

imum distance between the top of the

cabinet and the wall unit must be at least

100 mm . Ideally, however, the appliance

should not be positioned below over-

hanging wall units. Accurate levelling is

ensured by one or more adjustable feet

at the base of the cabinet.

WARNING!

It must be possible to disconnect

the appliance from the mains

power supply; the plug must

therefore be easily accessible af-

ter installation.

8.3 Rear spacers

2

4

3

1

You can find the two spacers in the bag

with documentation.

Do these steps to install the spacers:

1.

Release the screw.

2.

Engage the spacer below the screw.

3.

Turn the spacer to the right position.

4.

Tighten again the screws.

8.4 Levelling

When placing the appliance ensure that

it stands level. This can be achieved by

two adjustable feet at the bottom in

front.

18

www.aeg.com

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire