AEG FSE63717P Manuel d'utilisateur télécharger pdf (Page 21)

10.7 Cleaning the top spray

arm

We recommend to clean the top spray

arm regularly to prevent soil from

clogging the holes.

Clogged holes can cause unsatisfactory

washing results.

1. Remove the stoppers from the

sliding rails of the cutlery drawer and

pull the drawer out.

2

1

2. Move the upper basket to the lowest

level to reach the spray arm more

easily.

3. To detach the spray arm (C) from the

delivery tube (A), turn the mounting

element (B) counterclockwise and

pull the spray arm downwards.

C

B

A

4. Wash the spray arm under running

water. Use a thin pointed tool, e.g. a

toothpick, to remove particles of soil

from the holes. Run the water

through the holes to wash soil

particles away from the inside.

5. To install the spray arm back, insert

the mounting element in the spray

arm and fix it in the delivery tube by

turning it clockwise. Make sure that

the mounting element locks into

place.

6. Install the cutlery drawer on the

sliding rails and insert the stoppers.

11. TROUBLESHOOTING

WARNING!

Improper repair of the

appliance may pose a

danger to the safety of the

user. Any repairs must be

performed by qualified

personnel.

The majority of problems that may

occur can be solved without the need

to contact an Authorised Service

Centre.

Refer to the below table for information

on possible problems.

ENGLISH 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

Commentaires sur ces manuels

Pas de commentaire