AEG FSB52610Z Manuel d'utilisateur Page 44

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 68
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 43
Problem Possible cause and solution
Traces of rust on cutlery. There is too much salt in the water used for washing.
Refer to "The water softener".
Silver and stainless steel cutlery were placed together.
Avoid to put silver and stainless steel items close to-
gether.
There are residues of deter-
gent in the dispenser at the
end of the programme.
The detergent tablet got stuck in the dispenser and
therefore was not completely washed away by water.
Water cannot wash away the detergent from the dis-
penser. Make sure that the spray arm is not blocked or
clogged.
Make sure that items in the baskets do not impede the
lid of the detergent dispenser from opening.
Odours inside the appliance. Refer to "Internal cleaning".
Limescale deposits on the ta-
bleware, on the tub and on
the inside of the door.
The level of salt is low, check the refill indicator.
The cap of the salt container is loose.
Your tap water is hard. Refer to "The water softener".
Even using multi-functional tabs use salt and set re-
generation of the water softener. Refer to "The water
softener".
If lime scale deposits still remain, clean the appliance
with appliance cleaners which are particularly suitable
for this purpose.
Try different detergent.
Contact the detergent manufacturer.
Dull, discoloured or chipped
tableware.
Make sure that only dishwasher-safe items are washed
in the appliance.
Load and unload the basket carefully. Refer to basket
loading leaflet.
Place delicate items in the upper basket.
Refer to "Before first use",
"Daily use" or "Hints and
tips" for other possible
causes.
13. PRODUCT INFORMATION SHEET
Trade Mark AEG
Model FSB52610Z
Rated capacity (standard place settings) 13
Energy efficiency class A++
www.aeg.com44
Vue de la page 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 67 68

Commentaires sur ces manuels

Pas de commentaire