AEG FSB41600Z Manuel d'utilisateur télécharger pdf (Page 32)

only, it is possible to deactivate the

notification for refilling rinse aid.

However, for best drying performance,

always use rinse aid.

If standard detergent or multi-tablets

without rinse aid are used, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse

aid empty notification

Make sure the appliance is in user mode.

1. Press .

• The indicators , and

are off.

• The indicator still flashes.

• The display shows the current

setting:

= the rinse aid empty

notification is activated (factory

setting).

2. Press to change the setting.

= the rinse aid empty notification is

deactivated.

3. Press on/off to confirm the setting.

6.4 Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.

There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic

signal is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

Make sure the appliance is in user mode.

1. Press .

•

The indicators

, and

are off.

• The indicator still

flashes.

• The display shows the current

setting:

– = Acoustic signal off.

– = Acoustic signal on.

2. Press

to change the

setting.

3. Press on/off to confirm the setting.

6.5 AirDry

AirDry improves the drying results with

less energy consumption.

During the drying phase, the

door opens automatically

and remains ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

AirDry is automatically activated with all

programmes excluding (if

applicable).

To improve the drying performance refer

to the XtraDry option or activate AirDry.

CAUTION!

If children have access to the

appliance, it is advised to

deactivate AirDry as opening

the door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press .

www.aeg.com

32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

Commentaires sur ces manuels

Pas de commentaire