AEG FAV5270VI Manuel d'utilisateur télécharger pdf (Page 27)

Operating Instructions

Starting a dishwashing cycle

0 1. Open the dishwasher door.

2. Check that the dishes and cutlery are stacked in the dishwasher in such

a way that the spray arms are free to rotate.

3. Turn on the tap fully.

4. Press the ON/OFF button.

The LED in the ON/OFF button will illuminate.

5. Press the relevant button for the cycle required (see “Cycle Table”).

The cycle display will become illuminated.

6. Close the dishwasher door.

The dishwashing cycle will begin.

If an acoustic error message can be heard after the cycle has begun,

please read the section “What to do if ...”.

Changing/interrupting/aborting a dishwashing cycle

Only change or interrupt a dishwashing cycle that is in progress if it is

absolutely necessary. After the appliance has been closed again, the air

that has entered will be heated significantly and expand. As a result,

water may collect in the base of the appliance and trigger the anti-

flood system.

Changing a dishwashing cycle

If you would like to change the dishwashing cyclebefore closing the

dishwasher door, briefly press the button for the new dishwashing

cycle.

If you would like to change the dishwashing cycle after the cycle has

commenced, proceed as follows:

Hot steam may escape when the dishwasher door is opened. There is a

risk of scalding! Carefully open the door of the dishwasher.

0 1. Open the door of the dishwasher. The dishwashing cycle will stop.

2. Press the button for the new dishwashing cycle and hold it down.

First, the indicator for the dishwashing cycle that is currently running

will flash.

After several seconds only the indicator for the new dishwashing cycle

will be flashing.

3. Release the cycle button.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Pas de commentaire

AEG FAV5270VI Manuel d'utilisateur Page 27