9600 DCooker hoodOperating and Installation Instructions
10Remove the upper glass panelThe upper glass panel can be removed for cleaning.• Remove the grease filters.• Pull the handle L down. Fig. 5.• Remove
11Cleaning• Warning: always disconnect the hood from the mains power supplybefore cleaning it.Never insert pointed objects in the motor’s protective g
12Technical SpecificationsModels 9600 DDimensions - extractor ver (in cm):Height 80-122,5Width 89,8Depth 52Dimensions - filter version (in cm):Height
13Electrical connectionSafety warnings for the electricianBefore connecting the appliance to the power supply, check that thevoltage indicated on the
14Mounting – Figure 7• Place the outline (1) on the angle above the cooker hood.• As demonstrated, drill the hole and insert four screw anchors andfou
15Bild 7
AEG Hausgeräte GmbHPostfach 1036D-90327 Nürnberghttp://www.aeg.hausgeraete.de© Copyright by AEGLI1VVB Ed. 05/02
2ContentsSafety warnings 4for the user 4for the installer 4Description of the Appliance 6Extractor version 6Filter Version 6Control Panel 7LED Indicat
3Safety warningsfor the user• Always cover lighted elements, to prevent excess heat fromdamaging the appliance. In the case of oil, gas and coal fire
4• The air outlet must not be connected to chimney flues or combustiongas ducts. The air outlet must under no circumstances be connectedto ventilation
5Description of the ApplianceExtractor version• The hood is supplied as anextractor unit and can also beused with a filtering function byfitting one
6Control Panel• Best result are obtained by using a low speed for normal conditionsand a high speed when odours are more concentrated.Turn the hood on
7LED Indicator lights for verifying the saturationof filtersThis hood is supplied without a charcoal filter. If the hood is to be usedin the recircula
8Maintenance and care• The hood must always be disconnected from the electricitysupply before beginning any maintenance work.Metal grease filter• The
9Charcoal filter• The charcoal filter should only be used if you want to use the hood inits filtering function.• To do this you will need an original
Commentaires sur ces manuels