Aeg DC7003000M Manuel d'utilisateur télécharger pdf (Page 8)

Nonstick grill- / roasting pan

To bake and roast or as a pan to collect

fat.

Core temperature sensor

To measure how far the food is cooked.

Telescopic runners

For shelves and trays.

4. BEFORE FIRST USE

WARNING!

Refer to the Safety chapters.

4.1 Initial Cleaning

• Remove all parts from the appliance.

• Clean the appliance before first use.

Refer to chapter "Care and

Cleaning".

4.2 First Connection

When you connect the appliance to the

mains or after a power cut, you have to

set the language, display contrast, dis-

play brightness and time of day. Use the

shuttle to set the values. Press OK to

confirm.

4.3 Calibration

For best results with Auto Cooking , you

must calibrate the appliance. The cali-

bration time is 4 hours.

If you use manual cooking only,

you can ignore this procedure.

Conditions:

• The temperature in the kitchen must

be below 35 °C.

• Install the appliance in its permanent

location.

• Connect the appliance to the mains

supply and do not disconnect it again.

• If you change the appliance location

or electrical connection, you must do

the steps again.

Calibration:

1. Activate the appliance.

2. Select Basic Settings and press OK.

3. Select Calibration and press OK.

When you calibrate for the first

time, you can set the category

from the control panel or Auto

Cooking from the main menu to

start the procedure.

8

www.aeg.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Commentaires sur ces manuels

Pas de commentaire