AEG KVH 32 Guide d'installation télécharger pdf (Page 4)

Follow the steps below to remove the mounting

plate.

a. Remove the eight screws and washers

securing the radome to the baseplate (see

Figure 5).

b. Carefully lift up the radome until clear of the

antenna assembly and set aside in a safe

place.

c. Using a 1/2" wrench or nut driver, remove

the six bolts, nuts, and washers securing the

mounting plate to the baseplate (see

Figure 6).

NOTE: Be sure to keep the bolts in case the antenna

needs to be shipped to another location.

d. Remove the mounting plate and set it aside

for now (see Figure 7).

Figure 5: Removing the Radome

Radome

Screw and

Washer (x8)

Baseplate

Figure 6: Mounting Plate Bolts (Top View)

Figure 7: Removing the Mounting Plate

Remove the Mounting Plate

1 2 3 4 5 6 7 8 9 ... 23 24

Pas de commentaire

AEG KVH 32 Guide d'installation Page 4