AEG CIS6741ECM Manuel d'utilisateur télécharger pdf (Page 12)

Heat setting The hob deacti-

vates after

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

5.6 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: turn the knob for a cooking zone

to position A. comes on in the

display. Immediately set the correct heat

setting.

To deactivate the function: turn the

knob to the off position.

5.7 PowerBoost

This function makes more power

available to the induction cooking zones.

The function can be activated for the

induction cooking zone only for a limited

period of time. After this time the

induction cooking zone automatically

sets back to the highest heat setting.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

5.8 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of

the timer to set the time (00 - 99

minutes). When the indicator of the

cooking zone starts to flash slowly the

time counts down.

To see the remaining time: set the

cooking zone with

. The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To change the time: set the cooking

zone with . Touch or .

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

To deactivate the function you can also

touch

and at the same time.

When the time comes to an

end, the sound operates and

00 flashes. The cooking zone

deactivates.

To stop the sound: touch .

CountUp Timer (The count up timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of

the timer. comes on. When the

indicator of the cooking zone starts to

flash slowly the time counts up. The

display switches between

and

counted time (minutes).

To see how long the cooking zone

operates: set the cooking zone with .

The indicator of the cooking zone starts

to flash quickly. The display shows how

long the zone operates.

To deactivate the function: set the

cooking zone with and touch or

. The indicator of the cooking zone

goes out.

www.aeg.com

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Commentaires sur ces manuels

Pas de commentaire