AEG L87695WD Manuel d'utilisateur télécharger pdf (Page 24)

CAUTION!

Do not set a spin speed lower

than the automatic speed of

the set programme.

• Set the available options.

•

Press the button

8

until the black

line appears under one of the dryness

level symbol.

The iron dry level

comes on

The cupboard dry

level comes on.

The extra dry level

comes on.

The drying symbol

comes on.

The anti-crease sym-

bol comes on.

The time value on the display is the

duration of the washing + drying cy-

cles calculated on a default load size.

•

Press button

6

to start the pro-

gramme.

The set dryness level sym-

bol stays on.

The others level symbols

go off.

The door locked symbol

comes on.

The display shows the new time value

each minute.

The last minutes of the drying cy-

cle the appliance performs the

anti-crease and the cooling pha-

ses.

• When the programme is completed,

the appliance stops automatically.

• The acoustic signals operate.

•

When the symbol

goes off, you

can open the door.

• Remove the laundry from the appli-

ance. Make sure that the drum is emp-

ty.

• Close the water tap.

• Keep the door ajar, to prevent mildew

and odours.

11.2 NON-STOP programme -

Washing & Timed Drying

CAUTION!

Do not put a plastic device/ball

for the detergent into the

drum.

•

Press button

1

to activate the appli-

ance.

• Load the laundry.

• Measure out the detergent and the

fabric conditioner.

• Turn the programme dial to the wash-

ing programme. The display shows the

symbols of the different phases of the

washing cycle.

Do not set a spin speed lower than

the automatic speed of the set pro-

gramme.

• Set the available options.

•

Press the button

5

to set the drying

time value.

The drying symbol

comes on.

The anti-crease symbol

comes on.

The drying time symbol

comes on.

• The display shows the set drying value

time.

Set drying time value

• After some seconds the display shows

the total duration of the cycles:

Final time value (wash-

ing + drying + anti-

crease + cooling pha-

ses)

If you set a drying time of only 10

minutes, the final time value in-

cludes also the anti-crease and

the cooling phases.

• Press button 6 to start the pro-

gramme.

The door is locked

The display shows the new time value

each minute.

24

www.aeg.com

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

Commentaires sur ces manuels

Pas de commentaire