AEG L87695NWD Manuel d'utilisateur télécharger pdf (Page 24)

If you set the time value of

only 10 minutes, the

appliance performs only a

cooling phase.

10.4 At the end of the drying

programme

1. The appliance stops automatically.

2. The acoustic signals operate (if they

are active).

3. In the display comes on.

4. The indicator of button Start/Pauze

goes off.

5. The last minutes of the drying cycle

the appliance performs the anti-

crease phase.

The anti-crease symbol

flashes.

The door is still locked (the symbol

is on).

6. Press button Aan/Uit for some

seconds to deactivate the appliance.

After some minutes from

the end of the

programme, the energy

saving function

automatically

deactivates the

appliance.

7. When the door locked light goes

off you can open the door.

8. Remove the laundry from the

appliance. Make sure that the drum

is empty.

9. Keep the door ajar, to prevent

mildew and odours.

10. Close the water tap.

11. DAILY USE - WASHING & DRYING

WARNING!

Refer to Safety chapters.

11.1 NON-STOP programme

WARNING!

Do not put a plastic device/

ball for the detergent into

the drum.

1. Press button Aan/Uit for some

seconds to activate the appliance .

2. Load the laundry one item at a time.

3. Put the detergent and the additives

in the appropriate compartment.

4. Turn the programme dial to the

washing programme. The display

shows the symbols of the different

washing phases.

5. Set the available options.

WARNING!

Do not set a spin speed

lower than the automatic

speed of the set

programme.

11.2 Washing and Drying at

automatic levels

1. Press button Droogtegrad

repeatedly until the black line

appears under one of the dryness

level symbol.

The iron dry level

The cupboard dry level

The extra dry level

The drying symbol comes on.

The anti-crease symbol comes on.

The display shows that the appliance is

ready to start.

The time value on the display is the

duration of both cycles washing and

drying, calculated on a default load

size.

www.aeg.com

24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Commentaires sur ces manuels

Pas de commentaire