AEG SK48800-2I Manuel d'utilisateur télécharger pdf (Page 7)

min. 200 cm

Installation

Installation Location

The appliance should be set up in a well ventilated, dry room.

Energy use and efficient performance of the appliance is affected by

the ambient temperature.

The appliance should therefore

– not be exposed to direct sunlight;

– not be installed next to radiators, cookers or other sources of heat;

– only be installed at a location whose ambient temperature

corresponds to the climate classification, for which the appliance is

designed.

The climate classification can be found on the rating plate, which is

located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for

each climate classification:

If the refrigeration appliance is installed next to another refrigerator

or freezer a clearance of 5 cm at the sides is required, in order to pre-

vent the formation of condensation on the outside of the appliance.

Climate classification for an ambient temperature of

SN +10 to +32 °C

N +16 to +32 °C

ST +18 to +38 °C

T +18 to +43 °C

Your refrigerator needs ventilation

Integratable models (i-appliances)

The integrated door of the furniture cabi-

net largely seals the installation recess. i-

appliances must therefore be provided

with ventilation by having an opening in

the furniture plinth. The warmed air must

be able to be exhausted upwards through

the air shaft on the furniture back.

The ventilation cross-sections should be

at least 200 cm

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

Pas de commentaire

AEG SK48800-2I Manuel d'utilisateur Page 7