AEG S54000KMX0 Manuel d'utilisateur télécharger pdf (Page 33)

A

B

100 mm

min

20 mm

9.3 Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

rating plate correspond to your

domestic power supply.

• The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the

domestic power supply socket is not

earthed, connect the appliance to a

separate earth in compliance with

current regulations, consulting a

qualified electrician.

• The manufacturer declines all

responsibility if the above safety

precautions are not observed.

• This appliance complies with the

E.E.C. Directives.

9.4 Rear spacers

You can find the two spacers in the bag

with documentation.

1. Release the screw.

2. Engage the spacer below the screw.

3. Turn the spacer to the right position.

4. Tighten again the screws.

2

4

3

1

9.5 Levelling

Accurate levelling prevents the vibration

and noise of the appliance during

operation.

To adjust the heigh of the appliance

loosen or tighten the two adjustable

front feet.

9.6 Installation of the

CLEANAIR CONTROL filter

CAUTION!

The filter should be handled

carefully so fragments do

not loosen from the surface.

Make sure that the air lever

flap is closed to obtain

proper function.

The CLEANAIR CONTROL filter is an

active carbon filter which absorbs bad

odors maintain the best flavour and

aroma for all foodstuffs without risk of

odor cross contamination.

On delivery the carbon filter is in a plastic

bag to preserve performance.

1. Open the air lever flap.

2. Take the filter out of the plastic bag.

3. Insert the filter in the slot found in

the back of the air lever flap.

ENGLISH

33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

Commentaires sur ces manuels

Pas de commentaire