AEG HK654400XB Manuel d'utilisateur télécharger pdf (Page 13)

6. CARE AND CLEANING

Clean the appliance after each use.

Always use cookware with clean bottom.

Scratches or dark stains on the

glass-ceramic cause no effect on

how the appliance operates.

To remove the dirt:

1.

– Remove immediately: melted

plastic, plastic foil, and food with

sugar. If not, the dirt can cause

damage to the appliance. Use a

special scraper for the glass . Put

the scraper on the glass surface at

an acute angle and move the

blade on the surface .

– Remove after the appliance is

sufficiently cool: limescale rings ,

water rings, fat stains, shiny metal-

lic discolorations. Use a special

cleaning agent for glass ceramic

or stainless steel.

2.

Clean the appliance with a moist

cloth and some detergent.

3.

At the end rub the appliance dry

with a clean cloth.

7. TROUBLESHOOTING

Problem Possible cause Remedy

You cannot activate the

appliance or operate it.

Activate the appliance

again and set the heat

setting in less than 10

seconds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor

field.

The STOP+GO function

operates.

Refer to the chapter

“Daily Use”.

There is water or fat

stains on the control

panel.

Clean the control panel.

An acoustic signal

sounds and the appli-

ance deactivates.

An acoustic signal

sounds when the appli-

ance is deactivated.

You put something on

one or more sensor

fields.

Remove the object from

the sensor fields.

The appliance deacti-

vates.

You put something on

the sensor field

.

Remove the object from

the sensor field.

The residual heat indica-

tor does not come on.

The cooking zone is not

hot because it operated

only for a short time.

If the cooking zone oper-

ated sufficiently long to

be hot, speak to the

service centre.

The Automatic Heat Up

function does not oper-

ate.

The cooking zone is hot. Let the cooking zone be-

come sufficiently cool.

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Commentaires sur ces manuels

Pas de commentaire