AEG FSK93800P Manuel d'utilisateur Page 23

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 28
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 22
Problem Possible cause and solution
Rattling or knocking sounds
from the inside of the appli-
ance.
The tableware is not properly arranged in the baskets.
Refer to basket loading leaflet.
Make sure that the spray arms can rotate freely.
The appliance trips the cir-
cuit-beaker.
The amperage is insufficient to supply simultaneously all
the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian-
ces in use.
Internal electrical fault of the appliance. Contact an Au-
thorised Service Centre.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For other messages or problems not
described in the table, contact an
Authorised Service Centre.
12.1 The washing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results. Refer to "Daily use", "Hints and tips" and the basket
loading leaflet.
Use more intensive washing programmes.
Clean spray arm jets and the filter. Refer to "Care and
Cleaning".
Poor drying results. Tableware has been left for too long inside the closed
appliance.
There is no rinse aid or the dosage of rinse aid is not
sufficient. Adjust the rinse aid level to a higher level.
Plastic items may need to be towel dried.
For the best drying performance, activate XtraDry and
AirDry.
We recommend to always use rinse aid, even in com-
bination with multi-tablets.
There are whitish streaks or
bluish layers on glasses and
dishes.
The released quantity of rinse aid is too high. Adjust
the rinse aid level to a lower level.
The quantity of detergent is too high.
There are stains and dry water
drops on glasses and dishes.
The released quantity of rinse aid is not sufficient. Ad-
just the rinse aid level to a higher level.
The quality of the rinse aid can be the cause.
ENGLISH 23
Vue de la page 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire