AEG F55310VI0 Manuel d'utilisateur télécharger pdf (Page 9)

right level of the water softener to assure

good washing results.

Water hardness

German de-

grees (°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener lev-

el

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

If you use multi-tablets containing salt

and the hardness of your water is lower

than 21°dH, you can set the lowest water

softener level. It deactivates the salt refill

indicator.

If you use standard detergent or multi-

tablets without salt, set the proper

water hardness level to keep the salt

refill indicator active.

How to set the water softener

level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously

and

until the indicators ,

and start to flash

and the display is blank.

2. Press .

• The indicators

and

go off.

• The indicator continues to

flash.

• The display shows the current

setting: e.g. = level 5.

3. Press again and again to change

the setting.

4. Press the on/off button to confirm

the setting.

6.3 The rinse aid dispenser

The rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

Use of rinse aid and multi-

tablets

When you activate the option Multitab,

the rinse aid dispenser continues to

release rinse aid. However you can

deactivate the rinse aid dispenser. In this

case the drying results may not be

satisfactory.

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Commentaires sur ces manuels

Pas de commentaire