AEG BCM546350M Manuel d'utilisateur télécharger pdf (Page 13)

5. Put the plug of the core temperature

sensor into the socket located in the

front frame of the appliance.

The display shows the core temperature

sensor symbol.

6. Press

to save the new core

temperature, or wait 10 seconds for

the setting to be saved automatically.

The new default core temperature is

displayed during the next use of the core

temperature sensor.

When the food is at the set core

temperature, the default core

temperature and flashes. An acoustic

signal sounds for 2 minutes.

7. Press any button to stop the acoustic

signal.

8. Remove the core temperature sensor

plug from the socket and remove the

dish from the appliance.

WARNING!

There is a risk of burns as the

core temperature sensor

becomes hot. Be careful

when you unplug it and

remove it from the dish.

Changing the temperature

during the cooking

You can change the temperature at any

time during the cooking:

1. Press :

• one time - the display shows the

set core temperature which

changes every 10 seconds to the

current core temperature.

• two times - the display shows the

current oven temperature which

changes every 10 seconds to the

set oven temperature.

• three times - the display shows

the set oven temperature.

2. Use the knob for the temperature to

change the temperature.

8.2 Inserting the accessories

Wire shelf:

Push the shelf between the guide bars of

the shelf support and make sure that the

feet point down.

Baking tray/ Deep pan:

Push the baking tray / deep pan between

the guide bars of the shelf support.

Wire shelf and baking tray / deep pan

together:

Push the baking tray / deep pan between

the guide bars of the shelf support and

the wire shelf on the guide bars above.

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Commentaires sur ces manuels

Pas de commentaire